[Homeroast] Flair espresso maker
adt0611 at yahoo.com
Tue Nov 1 13:37:08 CDT 2016
According to the video that Greg linked to it looks much more like an actual espresso maker than Aeropress.
| | |
Flair Espresso Maker
From: Jeffrey Pawlan <jpawlan at pawlan.com>
To: homeroast at lists.sweetmariascoffee.com
Sent: Tuesday, November 1, 2016 11:17 AM
Subject: Re: [Homeroast] Flair espresso maker
Although attractive looking, it is not much of an improvement over the
AeroPress except that it incorporates a lever.
1. His argument that the (unnamed) AeroPress is inferior because you
cannot heat the brewing chamber is very poor from an engineering point
a) The plastic tube of the AeroPress does not conduct heat so the
hot water poured into it will actually remain mostly at temperature.
b) The stainless tube of the Flair does not conduct heat well and is
not thick so it will not contribute much to the brew temperature stability.
c) He mentions aluminum. If the inside of the tube or the plunger
is aluminum, Then sorry, I do not want aluminum in contact with my
coffee or any heated food.
2. I have carried the AeroPress in my suitcase around the world and
made my own coffee in my hotel room at least 70 times. It was always a
time sink. I had to also carry an electric immersion heater and a
digital thermometer with a thermocouple. When I was done, I had to clean
the AreoPress components in the bathroom sink. The Flair would require
the same steps.
Homeroast mailing list
Homeroast at lists.sweetmariascoffee.com
<a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's Forum</a>
<a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>
More information about the Homeroast