[Homeroast] Help with Quest

Barry Luterman lutermanb at gmail.com
Fri Jun 5 13:13:44 CDT 2015


I got lucky. Molly answered within an hour. The parts are ordered. I
printed your e mail out. I will bring it with me over to MiKes house.
Thanks very much ........Barry

On Fri, Jun 5, 2015 at 10:42 AM, Dhananjaya <
djgarcia at improbablystructuredlayers.net> wrote:

> Barry, Molly Yen is very helpful and they can get the elements to you
> fairly quickly. Although I got mine from SM I did order some
> replacement screws and basket from them. There is a noticeable reply lag
> due to the geography.
>
> It was a bit of a pain. I don't have any photos - too busy trying to
> figure out how to get things out properly. I do remember
> thinking "Why don't they make these wiring to the elements longer so you
> could unscrew them outside" - I was having problems
> reaching in to get the nut off. Then I saw that one side (the one I would
> have a problem with) was long enough to draw the element
> out while wired and then remove the nut, and the other one I was able to
> undo the nut while attached. Also IIR I did not have to
> remove other electrical parts, which I thought I would at first.
>
> Unfortunately I'm at that age where I remember taking them out, but
> details are very foggy. IIR I believe I only had to remove the
> outer circle screws at the front, not the inner ones. And of course I had
> to remove the lower back panel.
>
> Good luck! If I did it, you surely can, but you'll need a little patience.
>
> -----Original Message-----
> Date: Thu, 4 Jun 2015 15:44:14 -0700
> From: Barry Luterman <lutermanb at gmail.com>
> To: "A list to discuss home coffee roasting. There are rules for this
>         list,   available at http://www.sweetmarias.com/maillistinfo.html"
>         <homeroast at lists.sweetmariascoffee.com>
> Subject: Re: [Homeroast] Help with Quest
> Message-ID:
>         <CAJ0qWC5PShgLKtsgCrQ-4KiPuFOCiiS16mSw=
> G3GknFSkMRmEA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Ivan I guess you have been following the thread. SM is out of the coils. I
> went all over Portland looking for one. They are not available here. Byron
> told me to get in touch with the manufacturer in Taiwan. Did so and will
> order 2. MiKe offered to help me put it in. If you remember I am the member
> who is so mechanically inept: that if my car starts making funny noises I
> repair the car my turning my car radio volume up. I am slowly regaining my
> composure now after that original panic and lost day worrying about the
> whole thing. I have a Behmor for back-up. Just don't remember how to use it
> . Or for that matter where I stored it. It's hard getting old.
>
>
>
> _______________________________________________
> Homeroast mailing list
> Homeroast at lists.sweetmariascoffee.com
>
> http://lists.sweetmariascoffee.com/mailman/listinfo/homeroast_lists.sweetmariascoffee.com
> <a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's Forum</a>
> <a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>
>


More information about the Homeroast mailing list