[Homeroast] Poppery Heating Element

Jason Brooks brookswv at gmail.com
Mon Nov 3 08:56:14 CST 2014


Oh, forgot. I just screwed the nichrome to the post. IIRC, the plate was
for the non-gone thermo-cutoff.

On Mon, Nov 3, 2014 at 9:55 AM, Jason Brooks <brookswv at gmail.com> wrote:

> I fixed it for now, but still having a few issues. Got some roasted to
> survive the week and I'm going on a search for a 'new' Poppery. I guess I
> need to dust off the plans for the drum roaster...
>
> On Sun, Nov 2, 2014 at 1:17 PM, Ira <ira at extrasensory.com> wrote:
>
>> Hello Jason,
>>
>> Saturday, November 1, 2014, 2:11 PM, you wrote:
>>
>> > Thanks Steve. I'm trying to use what I have and I'm pondering drilling a
>> > hole in the plate to secure the wire lead through, then apply solder.
>> We'll
>> > see if it'll work. Need to let it sit for a few right now.
>>
>> I don't believe you can solder to nichrome wire, I would guess it was
>> originally spot welded and then something else was soldered.
>>
>> if you can drill a hole, I'd attach it with a screw, not and flat washers.
>>
>> -- Ira
>> _______________________________________________
>> Homeroast mailing list
>> Homeroast at lists.sweetmariascoffee.com
>>
>> http://lists.sweetmariascoffee.com/mailman/listinfo/homeroast_lists.sweetmariascoffee.com
>> <a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's Forum</a>
>> <a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>
>>
>
>


More information about the Homeroast mailing list