[Homeroast] Mike incorrect about Appia model.

Phil Palmintere phil.palmintere at gmail.com
Wed Dec 31 12:27:50 CST 2014


Perhaps you could post a YouTube video of your procedure. 

Sent from my cell phone



> On Dec 31, 2014, at 11:18 AM, Jeffrey Pawlan <jpawlan at pawlan.com> wrote:
> 
> The Appia model was designed at the very same time as the Aurilia. The head is smaller and lighter. I consulted to Nuova regarding thermocouples and temperature stability measurements.  I know the machine inside and out as I have taken every part of it apart. I can tell you that the Appia I have performs very similarly to the Aurilia.  It is certainly identically rugged, just smaller tank, 120v instead of 240v, and smaller group head.  The head is plenty large though.
> 
> In fact, my findings are that the espressos that are a 10 out of 10 result when I start the pour at a lower temperature and bring it up a couple of degrees very gradually by the end of the pour.  The head normally makes the temperature to be quite stable, usually within 0.4 degrees. But I modify that temperature by hand adjusting the pump pressure during the pour.
> 
> Regards,
> 
> Jeffrey Pawlan
> 
> 
> _______________________________________________
> Homeroast mailing list
> Homeroast at lists.sweetmariascoffee.com
> http://lists.sweetmariascoffee.com/mailman/listinfo/homeroast_lists.sweetmariascoffee.com
> <a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's Forum</a>
> <a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>



More information about the Homeroast mailing list