[Homeroast] Outlet lost power...

peter zulkowski peterz5743 at gmail.com
Mon Aug 27 12:03:44 CDT 2012

this one---- 0 minutes!

On Mon, Aug 27, 2012 at 1:02 PM, peter zulkowski <peterz5743 at gmail.com>wrote:

> This email only took 3 minutes to get from MA to the list. Pretty quick
> huh?
> PeterZ
> On Mon, Aug 27, 2012 at 12:56 PM, peter zulkowski <peterz5743 at gmail.com>wrote:
>> Brian, You just reminded me that in my house in AZ one of the outside
>> outlets was controlled by the GFI in a far away bathroom!
>> But be aware, in this apartment here in MA, not only did I trip the GFI
>> which is out on the back porch, which I use to roast, but I burned it out
>> and it would not reset :(   (15 Amps only)
>> Ymmv.
>> There are 20 amp GFI breakers available for your fuse box, and I got one
>> for AZ but never got to use it there.
>> The land lord suggested that I roast from a non GFI circuit, and for
>> practical reasons I agree. Somehow they do not like 12 ga. extension cords
>> plugged into them if you use roasters on them.
>> In my case the non GFI 20 Amp circuit is right inside the door, and if I
>> ever find my 20 amp GFI in my PILE left over from moving I will probably
>> install it here in the 20 amp line inside the door. Would be bad to put it
>> on a 15 amp line for sure. Wire melting inside walls is very bad for the
>> building.
>> Thanks for posting your results.
>> Happy roasting :)
>> PeterZ ( Not in LHC anymore) Happy and cool  now in Rockport, MA
>> On Mon, Aug 27, 2012 at 11:59 AM, Brian Kamnetz <bkamnetz at gmail.com>wrote:
>>> Hi all,
>>> I finally have my patio outlet problem figured out.
>>> A recap: I moved into a condo at the end of July. The condo has a
>>> concrete patio in back with an outlet right next to it. The patio is
>>> shaded in the morning and seemed like a good fair-weather place to
>>> roast. Shortly after I moved in I roasted a pound on the patio and
>>> everything went fine.
>>> A couple weeks later I tried to roast again and the outlet was dead.
>>> There are a couple switches on the wall inside the patio door and I
>>> fiddled with them but it didn't help. I strung a 12-ga extension cord
>>> out from an inside outlet and roasted, and came to work and posted my
>>> first question. There were many helpful replies, several mentioning
>>> GFCI outlets. The patio outlet isn't GFCI, but it was mentioned that
>>> several outlets can be strung together with one of them being GFCI and
>>> controlling the whole circuit. I have an electric alarm clock with a
>>> face that lights up when it is plugged in; I went around with that
>>> testing outlets in the house.
>>> Right away in the bathroom, which is right next to the patio outlet,
>>> there was a GFCI circuit that was blown. I reset it and confidently
>>> headed to the patio, but that outlet was still dead. I tried all the
>>> others, finding a couple GFCI outlets that were blown, but resetting
>>> them did not solve the patio outlet problem.
>>> I had checked all the breakers in the breaker box, but advice here was
>>> that sometimes a breaker is thrown even though it appears to be ok. I
>>> went to the breaker box and reset nearly all of them, but that didn't
>>> help either. I was looking at the breaker box again when I noticed a
>>> GFCI outlet nearby. It was blown, but resetting it didn't help.
>>> Well, a few days later, I tested the patio outlet again, and it was
>>> working. I had no idea how that could be, and spent a few days
>>> scratching my head. At least I now was able to find out that an inside
>>> switch controlled the patio outlet, and I now knew which way was "on".
>>> But I didn't know why the outlet worked sometimes and not other times.
>>> I've been busy and didn't get back to the problem until this morning.
>>> Of course, this time, instead of trying to find something that made
>>> the patio outlet work, I was looking for something that turned off
>>> power to the outlet. This morning, instead of walking out to the patio
>>> with my alarm clock after each change, I ran an extension cord from
>>> the patio outlet to inside the condo and plugged in an old boom box
>>> radio, so that I could tell immediately if the power was off. That was
>>> a BIG time saver. I went around the condo resetting the GFCI outlets,
>>> each time listening for the radio to stop, but it didn't, until I went
>>> out into the garage and tried the one next to the breaker box. Went
>>> back into the condo: No radio. Reset the GFCI, went back into the
>>> condo, and the radio was playing. So the riddle was solved.
>>> To summarize, the complicating factor of having a switch inside
>>> controlling the outside outlet, and also having the outlet controlled
>>> by a different GFCI outlet, made it difficult for me to diagnose the
>>> problem. But thanks to the advice from you all on the list, I was able
>>> to finally figure it out.
>>> Thanks again!
>>> Brian
>>> On Sun, Aug 26, 2012 at 3:59 PM, Rich <rich-mail at octoxol.com> wrote:
>>> > Helpful hint... 120vAC 60 Hz is deadly and is more than capable of
>>> killing
>>> > you quite dead.
>>> >
>>> >
>>> _______________________________________________
>>> Homeroast mailing list
>>> Homeroast at lists.sweetmariascoffee.com
>>> http://lists.sweetmariascoffee.com/mailman/listinfo/homeroast_lists.sweetmariascoffee.com
>>> <a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's
>>> Forum</a>
>>> <a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>

More information about the Homeroast mailing list