[Homeroast] broken behmor question

John Nanci john at chocolatealchemy.com
Sun Apr 29 15:49:49 CDT 2012


I tried this out this morning.  I hereby stand corrected - you are 
right Ira - it cycles, turning off the elements at proscribed 
times.  So, only on P1 does it stay on fully.

John

At 10:30 PM 4/28/2012, you wrote:
>At 03:12 PM 4/28/2012, you wrote:
>>It would be nice if the actual code was available so these 
>>questions could be answered. Foe example, is 70% power controlled 
>>by a setdown in the cavity temp sensor trip point or is power 
>>cycled to the heating lamps for a 70% duty cycle?
>
>70% means 70% on and 30% off in a 15 second cycle or something not 
>to far from that. It's been a long time since I ran the tests. It 
>has nothing to do with temperature and as far as I know, the probe 
>in the right rear is used both to keep the roaster from stating when 
>hot and to turn off the elements if the temperature passes whatever 
>the max allowed temperature is.
>
>You don't need the code, it's trivially easy to prove by experimentation.
>
>Ira
>
>_______________________________________________
>Homeroast mailing list
>Homeroast at lists.sweetmariascoffee.com
>http://lists.sweetmariascoffee.com/mailman/listinfo/homeroast_lists.sweetmariascoffee.com
><a href="http://www.sweetmariascoffee.com/forum/">Sweet Maria's Forum</a>
><a href="http://www.sweetmarias.com/library">Our new Coffee Library</a>




More information about the Homeroast mailing list