[Homeroast] need a quick fix for my Behmor drum cannot close it!
j.w.bullfrog at gmail.com
Tue Jul 26 14:19:27 CDT 2011
Strip a bit of electrical wire and wire it shut. Or any light wire like
Big Hey to all the old list friends, too many conf calls has let me drop in
for a minute.
On Tue, Jul 26, 2011 at 1:18 PM, Claus Thøgersen <c.thoeg at gmail.com> wrote:
> I have played around with external cooling after all the reports about the
> too long cooling process in the Behmor. and I have finally found something
> that works and ccool the beans in less than 4 minutes.
> In my tests I have taken out the drum in the way you should not, taken it
> out while the motor was still spinning the drum. The way to do it is of
> course to stop the Behmor and then take out the drum.
> This has resulted in the henge or whatever you call the thing that locks
> the top of the drum in place, cannot hold the led tide. Of course the Danish
> dealer does not have drums I g can get to replace my drum. The problem is
> that the European distributor is out of drums too, and there is no word of
> how long it will take before a new drum is available.
> Since my only problem is to find a way of closing the drum, a way that will
> be able to survive the heat in the roaster, I hope to find a sollution I can
> use until a new drum is available. Any ideas of something that can survive
> the heat?
> Homeroast mailing list
> Homeroast at lists.**sweetmariascoffee.com<Homeroast at lists.sweetmariascoffee.com>
> Homeroast community pictures -upload yours!) :
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion.
I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain.
More information about the Homeroast